KPF Zeller track cleaners for routine track cleaning in OO/HO and N gauge.

July 26, 2017

My experiments with the KPF Zeller OO/HO and N gauge track cleaning cars sold by Ten Commandment Models showed that they are particularly effective at cleaning the rails of any model railway.

I have been taking an interest in track cleaning technologies for years and have played around with several different types of track cleaning device – from Relcos (don’t use such high frequency track cleaners with DCC systems) to the amazing but expensive US-outline based CMX Clean Machine (not suitable for layouts with equipment and platforms close to the running lines because of the cleaning pad clips). Another elegant and simple track cleaning system has come to light in the form of the KPF Zeller track cleaning cars which are available in the UK for both OO/HO gauge and N gauge. They are imported and sold by Ten Commandment Models – the cars being German made.

Simple friction-based track cleaning which works through the action of weighted arms and pads of cleaning material. The OO/HO car (shown) has NEM coupling pockets which will accept Kadees, traditional UK outline couplings or anything you like!

The underside of the OO/HO cleaning car. The wheels can be exchanged for finer ones if desired for finescale OO and EM gauge. No cleaning fluids are needed for effective track cleaning.

The design of the cars allows the modeller to build a wagon body onto them if desired. Also, the cars are built within the loading gauge of HO and N gauge making them suitable for all types of UK-outline and European layouts which will have platforms and other structures close to the running line. They will be invaluable to those modellers with large layouts too, including US-outline modellers with miles of track such as my Montana Rail Link 4th Sub project. The cars are not powered – so they will work on any layout with any power system: traditional DC or DCC – it matters not!

The weighted and pivoted arms fitted to the OO/HO model with cleaning pads visible. Any suitable cleaning pad material can be used and is attached with double-sided sticky tape. Simply run the car around the layout, collect the dirt and then throw the dirty pads away!

The N gauge version. Both cleaning cars are specially weighted for effective cleaning and good track holding properties.

The N gauge car is shown once again. Two separate pivoted arms and pads are used to avoid catching any detail in the centre of the track, or indeed any third rail or stud contact system. The simple hook coupling will engage with standard N gauge couplings.

So that’s it! Personally, I prefer to clean the track before an operating session using a track cleaning car. Clean pads are fitted and the car run first around the main line track several times before being removed from the layout and the pads inspected for dirt collection. The spent pads are removed, which is easy to do, and new ones fitted before repeating the exercise. The cars are easily propelled into platform bays, dead end sidings and over complex point work. Once the layout has been covered, the track cleaning car can be stored in the staging area of the layout until it is next needed.

Some modellers may use the cleaning car throughout the operating session. It can be included in the formation of an engineers train and run almost continuously – there are couplings fitted to both ends of the cars which will allow it to be run as part of a train. If you decide that this is your preferred method, remember that the cleaning pad material is designed to collect dirt and should be discarded after a while or they will become ineffective.

For more information visit Ten Commandment Models here, here and here and also take a look at the rolling roads too. KPF Zeller’s web site can be viewed here. My thanks to Matt of KPF Zeller together with Dave of Ten Commandment Models for their assistance and an elegantly simple but well-engineered solution to routine track cleaning.

 

Advertisements